The densest data-center corridor on earth, read roof by roof.
Ashburn carries more concentrated critical load than any address in the country — and every one of those roofs, cooling plants, and switchyards sits inside the Washington DC Special Flight Rules Area. We verify your parcel's airspace before we promise a date, then fly radiometric thermal and high-resolution visual capture across 100% of the surveyed surface.
- FROM DCA
- 23.8 NM
- STANDING
- Inside the DC SFRA
- POSTURE
- Served with FAA authorization
- CELLS
- Per-parcel. Adjacent cells in the Ashburn area have logged 350 ft and 400 ft.
- COUNTY
- Loudoun County
Ashburn sits inside the DC SFRA, so operations run under FAA authorization with NOTAM discipline. Inside the SFRA the standing UAS security NOTAM is VMC-only and bars night, so flights are scheduled in daytime and twilight windows. Altitude is set by your parcel's cell ceiling or Part 107's 400-foot limit, whichever is lower.
HOW THIS IS READ → THE AIRSPACE GUIDE- 23.8NM
- Great-circle distance from the DCA VOR/DME — inside the 30 NM Special Flight Rules Area
- 100%
- Coverage per single mission — every section surveyed, no personnel on the membrane
- 48HR
- Findings report targeted within 48 hours of capture — geolocated and severity-ranked
- Radiometric
- Thermal payload class — findings resolve as measured ΔT signatures, not impressions
What we inspect in Ashburn.
Hyperscale and colocation campuses
Roof assemblies, cooling plants, and electrical yards across campuses where an unplanned outage is measured in millions. Thermal capture finds wet insulation, cooling losses, and connections running warm before they become an incident on someone else's status page.
Cooling towers and heat-rejection equipment
Fouled fill, blocked airflow, and distribution losses read as temperature signatures from the air. Aerial thermal shows which cells are carrying load unevenly — the difference between a cleaning and a rebuild.
Industrial and flex roofs
Large low-slope assemblies across Ashburn's industrial parks. Moisture trapped under intact membrane is invisible from the ground and obvious in thermal — located by section, before it becomes a tear-out.
HOA and community roofs
Townhome clusters and community buildings across the Brambleton and Broadlands corridor. One pass produces a reserve-study-grade record for boards deciding where next year's roof budget goes.
Substations and switchgear
Findings ranked to NFPA 70B severity classes — the standard your maintenance team already runs — so the report maps directly onto work orders.
Engagements runnable in Ashburn.
Send us an address in Ashburn.
We come back with the cell ceiling, the authorization path, and the flight windows that apply to that specific parcel — before anyone talks about scheduling.
Ashburn, answered.
Can you fly in Ashburn? Ashburn is inside the DC SFRA.
Yes — Ashburn sits at 23.8 NM from the DCA VOR/DME, inside the 30-mile Special Flight Rules Area, and it is core service area for us. SFRA operations run under FAA authorization with NOTAM discipline, which is part of every site's setup rather than an afterthought. We verify the specific parcel before we commit to a date.
What altitude will you fly over our campus?
Whatever your parcel's grid cell allows, or Part 107's 400-foot limit, whichever is lower. Adjacent cells in the Ashburn area have logged different ceilings — 350 feet in one, 400 in the next — which is why we pull your parcel's cell at its centroid and corners instead of quoting the town a single number. Where the profile needs to sit above the cell ceiling, the request goes through a manual FAA path and we file early.
Can you fly at night to catch thermal contrast?
Inside the SFRA, no — the standing UAS security NOTAM limits operations to clear-weather daylight. Thermal contrast does peak in the hours after sunset, so for parcels verified outside the SFRA we schedule night capture; for Ashburn parcels we plan around twilight and dry-day windows, which still produce strong ΔT separation on a wet roof.
How does this work with a commissioning schedule?
Well. A thermal baseline captured before a hall is energized becomes the reference the rest of the building's history gets measured against. We are used to working around energized equipment and active construction, and we coordinate with your commissioning agent rather than around them.
Do you publish findings or cite us anywhere?
No. You get a mutual NDA by default, findings are prepared for you and your contractors, and we do not publish client sites, tenant names, or findings. The severity-ranked report is written as scope, not as a sales pitch.
Who acts on what you find?
Your own contractors and maintenance team. Jinki inspects only and performs no remediation — so the report carries no conflict of interest, and every finding arrives with the image pair and measurement attached.
Related field notes.
Request a Q3 assessment
Two fields. A one-business-day response target. A mutual NDA before we see your site.
- Mutual NDA by default
- $5M liability coverage per operation
- Your data stays in your control
REQUEST FILED
- REF
- FILED
- SCOPE
- FACILITY ASSESSMENT
- NEXT
- FOUNDER RESPONSE TARGET < 1 BUSINESS DAY
Filed directly with Adnan Abdillahi, founder. Keep the reference for your reply.